See the help for Scanning Offset Adjustment here. Scanning offset is useful when doing raster or vector scanning at high enough speeds that delays in your power supply cause the firing point to be a little behind where it should be.
If your laser has a red-dot pointer that is not aligned with your beam, you can enable the Laser Offset value to compensate for this when framing and positioning. If your laser output is mirrored horizontally or vertically, move the dot to the opposite corner, horizontally or vertically, depending on the direction that the output is mirrored, and that will correct it. If you have a DSP laser, like Ruida or Trocen, the origin is usually where the limit switches are placed, and will will be the corner the laser seeks when powered up. If you have a GCode based system, this is almost always at the front left, regardless of the location of your limit switches.
This is the origin corner or 0,0 location for your laser. Note that this setting does not affect the laser itself, it's just to tell LightBurn how large the work area of the laser is. Set this to the maximum X and Y travel for your laser. This is the working size of your laser bed. PT Head Cameras Q8721 and Q8722 are two separate cameras sold as a bundle, thus they require two device licenses in AXIS Camera Station.Numeric Edits - size, position, orientationĪfter initial setup, you can access device settings under the Edit > Device Settings menu. The license included in the AXIS A1001 is due to limited functionality along with the AXIS Entry Manager which handles access control with some basic integration to the AXIS Camera Station. ***The AXIS A1601 does not include a core device license as it has full and unified support within AXIS Camera Station Secure Entry.
Note that there are no AXIS Camera Station licenses included in AXIS S30 Recorder Series. **AXIS S30 Series are recorders, not traditional devices therefore, they do not require an AXIS Camera Station license. * Currently, and until further notice, one Core Device license is included in the products listed below.
0 kommentar(er)
